How to use the inkjet printer to maximize the value of the inkjet printer?

The normal and efficiency of the machine is related to many factors, but in general, the efficiency of the printer is related to the following factors: the installation training, maintenance, and the use of the consumables of the jet printer. Guangzhou Tong Yi focuses on the installation, maintenance, and use of the consumables for 10 years. I'll give you an introduction today.

First, the installation of the printer: the most important of the installation of the jet code machine and the most easy to ignore is the grounding wire of the printer. Although the automatic code machine is used with the production line, it realizes the synchronization of the marking and production. At the same time, it also makes the manual operation standard easy and greatly liberates the production capacity. When the jet printer is installed in the production line, the nozzle should be fixed to ensure that the tilt and jitter will not occur during the jet printing. When installing the nozzle, attention should be paid to protecting the nozzle, at the same time, it is convenient to open and close the daily nozzle part. It is necessary to follow the following suggestions. Fixed the nozzle according to the position and direction of the jet printing, attention should be paid to ensure that the nozzle cover is easy to open and close. The position of the sprinkler head is as horizontal as possible with the bottom face of the keyboard. The lowest can not be lower than the lower end of 1 meters. The distance from the nozzle to the printer is between 2 and 25 mm (depending on the size of the nozzle). The fixed throat can reduce the influence of external vibration on the printing performance, prevent the possibility of extrusion and impact, and the bending radius of the throat should not be less than 250mm. The static electricity on the surface of the printed object will affect the printing effect and the stability of the machine, resulting in ink accumulation on the lower end of the sprinkler and its interior. If necessary, the grounding steel brush can be used on the surface of the spurted code to release static electricity. Of course, the application process after the installation of the jetting machine should also pay attention to the observation of the operation of the printer. It is suggested as follows: before the injection, insert the ink box, open the power switch, clean the nozzle and download the edited file to the machine, and the code printer is not so troublesome because of the automatic clear function of the sprinkler, and the operation is more than the general domestic machine. To be simple, the printing effect is better, and the failure rate is low.

Talk about the maintenance of the printer: as the saying goes, you want to let the horse eat grass on the horse. Some customers do not use the jet code machine for a few years to do a maintenance, can the jet code machine work well in the work?. the jet code machine maintenance mainly pay attention to the following aspects: 1, regular inspection of the shell of the jet code machine, and wipe clean. Preventing the leakage of ink from causing the corrosion of the shell of the inkjet printer, and protecting the shell of the inkjet printer can prolong the life of the inkjet printer effectively. The shell of the inkjet printer itself is corrosion resistant, but it can not be immersed in ink or cleaning fluid for a long time. Therefore, when ink or cleaning fluid is glued to the casing, it should be cleaned promptly with a rag. 2. in the process of using, check the ink supply line (the ink bag or the ink drum to the inkjet printer) regularly for cracks and breakage. Once found, it should be repaired or replaced as soon as possible. Otherwise, it will easily cause the wear of the gear pump of the inkjet printer. The gear pump of the inkjet printer is a durable part, with a life expectancy of more than 7 years or longer. However, if the ink line is damaged and is not found and processed in time, it may be possible to damage the gear pump of the inkjet printer in half a day or a day. The maintenance cost after the damage of the gear pump of the inkjet printer is a very small number. A customer should rupture the pipeline without timely detection and cause damage to the gear pump of the inkjet printer. It seems that checking the ink supply line of inkjet printer is a basic maintenance method. 3. the inkjet printer generally consists of water based ink (environmentally friendly ink), ketone based ink (quick drying ink), alcohol based ink (generally drying speed, and more environmentally friendly). Some companies may have different large character inkjet printer using different substrates of ink. When using, we must pay attention to distinguish. A lot of customers used to miss ink (ink mixing), causing great economic losses, according to the engineer of Tong Yi company. Guangzhou Tong Yi engineer recommends that the vast majority of inkjet printer users, when changing the ink, must be optimistic about the ink label, confirm the correct installation of new ink. The inkjet printer engineer revealed to the author that although some customers had read the ink label, they knew that the ink model was wrong, and they also had the luck to use the wrong ink. Failure of the inkjet printer must be stopped and cleaned. Guangzhou engineers are responsible for the professional attitude to prompt the user, even if the production task is urgent, it can not be lucky. The stop and fault caused by the wrong ink will make you repent. 4. clean the dust in the casing of the machine regularly. Dust is the killer of electronic components. If not cleaned regularly, it is easy to damage the circuit boards early. After damage, manufacturers generally do not provide maintenance, but need to buy new circuit board replacement. This is also a small number. Therefore, regularly cleaning the dust inside the inkjet printer is very important and necessary. There were customers who were not able to clean the dust of the electronic system because of the bad environment. In the past 2 years, a data board and a drive board had been burned, and the loss was very serious. Later, after careful guidance from the company engineers, there are special personnel regularly cleaning the dust of the electronic system. The problem of a continuous use of an electronic system for 3 years has been used continuously. In a conversation with the customer's equipment manager, I learned that the clean electronic system was also very simple, and the effect was very good, and for a long time there was no problem.

At last, it says the consumables and spare parts of the printer: the spray machine consumables are designed for the printer. In order to ensure the best work of the printer, the customers can not greedy for some low quality ink, and the inferior ink can not be used. The poor quality ink produced by some manufacturers in the market